Need help?Do you have a question about the Siemens SIMATIC ET 200SP CM 1xDALI and is the answer not in the manual?
General| Product Type | Control Unit |
|---|---|
| Brand | Siemens |
| Model | SIMATIC ET 200SP CM 1xDALI |
| Interface | DALI |
| Number of Channels | 1 |
| Mounting Type | DIN Rail |
| Communication Protocol | DALI |
| Power Supply | 24 V DC |
| Number of DALI Devices Connectable | 64 |
| Compatible Systems | SIMATIC ET 200SP |
| Storage Temperature | -40 to +70 °C |
| Protection Class | IP20 |
| Relative Humidity | 5% to 95% (non-condensing) |
| Power Loss | 1.5 W (typical) |
| Operating Temperature | -20 °C to +60 °C |
Lists technical properties, supported system functions, and module functionality.
Safety and operational notes, including warnings for device use.
Requirements for DALI cable, length, cross-section, and current limits.
Illustrates the module's block diagram and terminal assignment.
Details DALI parameters available for configuration in Module Parameters.
Describes basic function blocks used for sending DALI commands.
Details blocks for DALI device addressing, identification, and querying.
Explains blocks for DALI control gear level and color settings.
Covers blocks for querying status information of DALI devices.
Describes blocks for configuring DALI device parameters.
Lists diagnostic alarms, error codes, meanings, and solutions.
To Next Page
