Need help?Do you have a question about the Siemens SIMATIC ET 200SP IM 155-6 DP HF and is the answer not in the manual?
General| Product type designation | IM 155-6 DP HF |
|---|---|
| Manufacturer | Siemens |
| Series | SIMATIC ET 200SP |
| Interface | PROFIBUS DP |
| Protocol | PROFIBUS DP |
| Power Supply | 24 V DC |
| Number of DP masters | 1 |
| DP master | Yes |
| Isochronous mode | Yes |
| Integrated web server | Yes |
| PROFINET IO Device | No |
| Number of IO controllers | 0 |
| IRT | No |
| MRP | No |
| MRPD | No |
| Shared device | No |
| Rated value (DC) | 24 V |
| Permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Protection class | IP20 |
| Mounting | DIN rail |
| Transmission rate | 12 Mbps |
| Address area | 244 bytes |
| I&M data | Yes |
| Number of S7 program blocks | 0 |
| Number of clock memories | 0 |
| Number of counters | 0 |
| Number of data blocks | 0 |
| Number of timers | 0 |
| Operating temperature | 60 °C |
| Storage temperature | -40 °C to +70 °C |
| Relative humidity | 95% |
System for safety notices and their degree of danger.
Defines personnel qualified for operating the system.
Guidelines for correct and safe product usage.
List of registered and used trademarks.
Statement on liability and publication consistency.
Explains the manual's objective and relation to other documents.
Instructions on observing marked notes and conventions.
Guidance for environmentally friendly equipment disposal.
Details on the system manual and STEP 7 online help.
Description of module-specific information in product manuals.
Overview of function manuals and product information resources.
Reference to the complete ET 200SP documentation file.
Personal workspace for online support and managing documentation.
Functionality for creating custom manuals from existing content.
Access to product data, drawings, and models for CAx systems.
Tools and examples for solving automation tasks.
Tool for selecting, configuring, and ordering automation devices.
Software for commissioning and maintenance of SIMATIC S7 stations.
Network analysis tool for PROFINET commissioning.
Network planner for PROFINET automation systems.
Details of the interface module's article number and components.
Information on I/O data capacity and module limits.
List of optional accessories for the ET 200SP system.
Description of the server module and its functions.
Overview of supported functions like PROFIBUS DP and firmware updates.
Software requirements for configuring the interface module.
Parameter for preparing the I/O system for extensions and options.
Pin assignment details for 24 V DC supply voltage.
Terminal assignment for the PROFIBUS DP interface.
Illustrates the internal structure and connections of the interface module.
Procedure for setting the PROFIBUS DP address using a DIP switch.
Lists available parameters for the IM 155-6 DP HF interface module.
Detailed explanation of module parameters.
Parameter for enabling the configuration control function.
Parameter behavior for configuration mismatches.
Parameter to enable or disable diagnostic interrupts.
Parameter to enable or disable hardware interrupts.
Parameter to enable/disable module insert/remove interrupts.
Defines output behavior when data is unavailable.
Overview of LED indicators for status and errors.
Meaning and remedies for RN, ER, MT LEDs.
Status display of the Power (PWR) LED.
Status display of the Data Point (DP) LED.
Configuration error signaling via ERROR and MAINT LEDs.
How the LED error display provides information on error causes.
Tables detailing error types, locations, and causes.
Introduction to interrupt handling and diagnostic data records.
Methods for reading diagnostic data records.
Details the structure of interrupt sections for the system.
Structure of bytes for diagnostic interrupt information.
Structure of diagnostic interrupt data from modules.
Illustrative example of a diagnostic interrupt.
Structure of bytes for hardware interrupt information.
How to evaluate interrupts in the ET 200SP system.
Conditions and process for triggering diagnostic interrupts.
Conditions and process for triggering hardware interrupts.
Conditions for triggering module insert/remove interrupts.
Actions after diagnostics alarms in DPV1 mode.
Procedures for reading diagnostics data using STEP 7.
Structure and details of slave diagnostics.
Overview of DP slave status bits.
Information on the master PROFIBUS address diagnostics byte.
Indicates if modules have errors based on identifiers.
Indicates the status of configured modules.
Information about channel errors within modules.
Structure and information regarding the H status.
Incorrect configurations and their diagnostic implications.
Reactions of I/O modules to load voltage failure.
Lists valid firmware versions for I/O modules.
Details on hot-swapping ET 200SP I/O modules.
Compatibility of the IO-Link Master communication module.
Maximum reaction time for fail-safe modules.
Information on the first BaseUnit in system configuration.
Detailed technical specifications of the IM 155-6 DP HF interface module.
To Next Page