Siemens SIMATIC ET 200SP IM 155-6 DP HF - Compatibility; Compatibility of modules

Interface module IM 155-6 DP HF (6ES7155-6BA01-0CN0)
Manual, 10/2018, A5E03916550-AD
49
Compatibility
6
6.1
Compatibility of modules
Valid firmware versions
The table below lists the valid firmware versions and their field of application for the I/O
modules.
I/O modules
Firmware version
Comment
DI 8x24VDC ST V1.0.1 As of this version, you have the option to oper-
ate I/O modules after an IM 155-6 DP HF
(6ES7155-6BA00-0CN0) interface module.
DI 16x24VDC ST
DQ 4x24VDC/2A ST
DQ 8x24VDC/0.5A ST
DQ 16x24VDC/0.5A ST
AI 4xI 2-,4-wire ST
AI 4xU/I 2-wire ST
AI 4xRTD/TC 2-,3-,4-wire HF
AQ 4xU/I ST
Status of the supply voltage
Load voltage diagnostics are only valid if the station started up with a valid and complete
configuration.
● For modules without parameter assignment in the following table, the status of the supply
voltage (status byte of the server module) is always signaled as "1" regardless of the
actual status of the supply voltage.
● When a potential group is exclusively made up of modules without parameter assignment
from the table below, no group diagnostics "Missing supply voltage L+" is signaled for this
potential group.
Modules
Article number
DI 8x24VDC ST
6ES7131-6BF00-0BA0
DI 16x24VDC ST
6ES7131-6BH00-0BA0
DI 8x24VDC HF
6ES7131-6BF00-0CA0
DQ 4x24VC/2A ST
6ES7132-6BD20-0BA0
DQ 8x24VDC/0.5A ST
6ES7132-6BF00-0BA0
DQ 16x24VDC/0.5A ST
6ES7132-6BH00-0BA0
DQ 8x24VDC/0.5A HF
6ES7132-6BF00-0CA0