Siemens SIMATIC ET 200SP IM 155-6 DP HF User Manual

Interface module IM 155-6 DP HF (6ES7155-6BA01-0CN0)
Manual, 10/2018, A5E03916550-AD
17
Connecting
3
3.1
Terminal assignment
24 V DC supply voltage
The table below shows the signal names and descriptions of the pin assignment of the
24 V DC supply voltage.
Table 3- 1 Pin assignment 24 V DC supply voltage
View
Signal name
1)
Description
Connector
IM connection
1L+
24 V DC
2L+ 24 V DC (for looping through)
2
1M
Ground
2M Ground (for looping through)
2
1
1L+ and 2L+ as well as 1M and 2M are internally bridged.
2
Maximum 10 A permitted.

Siemens SIMATIC ET 200SP IM 155-6 DP HF Specifications

General

Product type designation	IM 155-6 DP HF
Manufacturer	Siemens
Series	SIMATIC ET 200SP
Interface	PROFIBUS DP
Protocol	PROFIBUS DP
Power Supply	24 V DC
Number of DP masters	1
DP master	Yes
Isochronous mode	Yes
Integrated web server	Yes
PROFINET IO Device	No
Number of IO controllers	0
IRT	No
MRP	No
MRPD	No
Shared device	No
Rated value (DC)	24 V
Permissible range, upper limit (DC)	28.8 V
Reverse polarity protection	Yes
Protection class	IP20
Mounting	DIN rail
Transmission rate	12 Mbps
Address area	244 bytes
I&M data	Yes
Number of S7 program blocks	0
Number of clock memories	0
Number of counters	0
Number of data blocks	0
Number of timers	0
Operating temperature	60 °C
Storage temperature	-40 °C to +70 °C
Relative humidity	95%