Siemens SIMATIC ET 200SP IM 155-6 DP HF User Manual

Product overview
2.2 Functions
Interface module IM 155-6 DP HF (6ES7155-6BA01-0CN0)
16 Manual, 10/2018, A5E03916550-AD
2.2.2
Configuration control
Properties
Configuration control allows you to prepare your distributed I/O system for future extensions
or options. Configuration control means that you can configure the planned maximum
configuration of your distributed I/O system in advance and vary it later in a flexible manner
by means of the user program.
Reference
You can find more information on configuration control
● in the ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual
● on the Internet under the following link: Application collection
(http://support.automation.siemens.com/WW/view/en/29430270)
● in the STEP 7 online help.

Siemens SIMATIC ET 200SP IM 155-6 DP HF Specifications

General

Product type designation	IM 155-6 DP HF
Manufacturer	Siemens
Series	SIMATIC ET 200SP
Interface	PROFIBUS DP
Protocol	PROFIBUS DP
Power Supply	24 V DC
Number of DP masters	1
DP master	Yes
Isochronous mode	Yes
Integrated web server	Yes
PROFINET IO Device	No
Number of IO controllers	0
IRT	No
MRP	No
MRPD	No
Shared device	No
Rated value (DC)	24 V
Permissible range, upper limit (DC)	28.8 V
Reverse polarity protection	Yes
Protection class	IP20
Mounting	DIN rail
Transmission rate	12 Mbps
Address area	244 bytes
I&M data	Yes
Number of S7 program blocks	0
Number of clock memories	0
Number of counters	0
Number of data blocks	0
Number of timers	0
Operating temperature	60 °C
Storage temperature	-40 °C to +70 °C
Relative humidity	95%