Siemens SIMATIC ET 200SP IM 155-6 DP HF - Requirements

Product overview
2.2 Functions
Interface module IM 155-6 DP HF (6ES7155-6BA01-0CN0)
Manual, 10/2018, A5E03916550-AD
15
Requirements
The table below shows the software requirements for a configuration with the
IM 155-6 DP HF interface module:
Table 2- 1 Version dependencies of other module functions
Function
Product version
of the module
as of
Firmware version
of the module as
of
Configuration software
Configuration
with GSD file
(http://support.a
utoma-
tion.siemens.co
m/WW/view/en/
19698639/1300
00) / software
from a third-
party manufac-
turer
1
STEP 7 as of
V5.5 SP3 with
HSP0242
STEP 7 (TIA
Portal) as of
V13
Operation after Y-link (not with
F-modules)
1 V1.1.0 X - -
Hot-swapping
1
V1.0.0
X
X
X
Station extension via ET-
Connection
1 V3.0.0 X X (as of
HSP0242 V2)
-
F-direct data exchange 1 V3.1.0 - X (as of
HSP0242 V3)
-
Interface module; article num-
ber: 6ES7155-6BA01-0CN0
1 V4.2 - X
2
X (as of V15.1)
1
Systems of third-party manufacturers: Depending on the range of functions of the third-party system
2
Configure the module as version 6ES7155-6BA00-0CN0 FW V3.1 (as of HSP0242 V3)