Siemens SIMATIC ET 200SP IM 155-6 DP HF - Technical specifications

Interface module IM 155-6 DP HF (6ES7155-6BA01-0CN0)
52 Manual, 10/2018, A5E03916550-AD
Technical specifications
7
7.1
Technical specifications
Technical specifications of the IM 155-6 DP HF
The following table shows the technical specifications as of 08/2018. You can find a data
sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/de/en/pv/6ES7155-6BA01-0CN0/td?dl=de).
Article number
6ES7155-6BA01-0CN0
General information
Product type designation IM 155-6DP HF with PROFIBUS connector and
server module
Firmware version V4.2
Product function
• I&M data
Yes; I&M0 to I&M3
• Module swapping during operation (hot
swapping)
Yes; Multi-hot swapping
Engineering with
• STEP 7 TIA Portal configurable/integrated
as of version
V15 SP1
• STEP 7 configurable/integrated as of ver-
sion
As of V5.5 SP4, only up to FW V3.1
• PROFIBUS as of GSD version/GSD revi-
sion
One GSD file each, Revision 3 and 5 and higher
Configuration control
via dataset
Yes
Supply voltage
Rated value (DC)
24 V
permissible range, lower limit (DC)
19.2 V
permissible range, upper limit (DC)
28.8 V
Reverse polarity protection
Yes
Mains buffering
• Mains/voltage failure stored energy time
10 ms
Input current
Current consumption, max.
335 mA
Inrush current, max.
1.6 A
I²t
0.038 A²·s
Power loss
Power loss, typ.
1.5 W