Siemens SIMATIC ET 200SP IM 155-6 DP HF User Manual

Connecting
3.2 Block diagram
Interface module IM 155-6 DP HF (6ES7155-6BA01-0CN0)
Manual, 10/2018, A5E03916550-AD
19
3.2
Block diagram
The following figure show the block diagram of the IM 155-6 DP HF interface module.
①
ET 200SP backplane bus interface and electronics
L+
24 V DC supply voltage
②
Backplane bus
M
Ground
③
Internal power supply
RN
RUN/STOP LED (green)
X80 24
V DC
Feed supply voltage ER ERROR LED (red)
PB
PROFIBUS interface
MT
MAINT LED (yellow)
PWR
POWER LED (green)
DP
PROFIBUS DP LED (green)
Figure 3-1 Block diagram of the IM 155-6 DP HF interface module

Siemens SIMATIC ET 200SP IM 155-6 DP HF Specifications

General

Product type designation	IM 155-6 DP HF
Manufacturer	Siemens
Series	SIMATIC ET 200SP
Interface	PROFIBUS DP
Protocol	PROFIBUS DP
Power Supply	24 V DC
Number of DP masters	1
DP master	Yes
Isochronous mode	Yes
Integrated web server	Yes
PROFINET IO Device	No
Number of IO controllers	0
IRT	No
MRP	No
MRPD	No
Shared device	No
Rated value (DC)	24 V
Permissible range, upper limit (DC)	28.8 V
Reverse polarity protection	Yes
Protection class	IP20
Mounting	DIN rail
Transmission rate	12 Mbps
Address area	244 bytes
I&M data	Yes
Number of S7 program blocks	0
Number of clock memories	0
Number of counters	0
Number of data blocks	0
Number of timers	0
Operating temperature	60 °C
Storage temperature	-40 °C to +70 °C
Relative humidity	95%