Need help?Do you have a question about the Siemens ET 200SP HA and is the answer not in the manual?
General| Product Type | Control Unit |
|---|---|
| Protection Rating | IP20 |
| Power Supply | 24 V DC |
| Degree of Protection | IP20 |
| Mounting Type | DIN Rail |
| Communication Protocol | PROFINET |
| Communication Interface | PROFINET, PROFIBUS |
| Modularity | Yes |
| Storage Temperature | -40 °C to +70 °C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Shock Resistance | 15 g |
Information about the manual's scope and relation to other system manuals.
Explains symbols and notes used for important information in the manual.
Details the technical characteristics, components, and functions of the interface module.
Specifies pin configurations for 24V DC supply and PROFINET IO connections.
Presents a block diagram of the interface module, explaining its structure.
Explains module configuration and references additional documentation for settings.
Describes procedures for module replacement and device name management.
Explains the meaning and states of LEDs on the interface module and BusAdapter.
Details diagnostic and maintenance messages generated by the module and their causes.
Covers article number, general specs, and details on the 24 V DC supply voltage.
Details PROFINET interfaces, communication services, and redundancy features.
Lists ambient operating limits, dimensions, weights, and address space details.
Provides technical details for different types of BusAdapters used with the module.
Explains diagnostic codes, their causes, and troubleshooting remedies.
To Next Page
