Siemens ET 200SP HA - Parameters; 4.1 Parameter assignment

Parameters
4
4.1 Parameter assignment
Configuring
You configure the ET 200SP HA on a CPU 410 as of FW V8.2.
Parameters
The parameter assignment specifies the properties of the IO device.
Additional information
You can find information on basic procedures and available settings in the following
documentation:
● STEP 7 online help
● Function manual
SIMATIC; ET 200SP HA; ET 200SP HA - High-precision Time Stamping
● When PCS 7 as of V9.0 is used:
– Configuration manual PCS 7 Process Control System; Engineering System V9.0
– Function manual SIMATIC; Process Control System PCS 7; High-precision Time
Stamping with ET 200SP HA
Interface Module IM 155-6 PN HA (6DL1155-6AU00-0PM0)
Manual, 05/2017, A5E39262148-AA 15