Technical specifications
7
Article number 6DL1155-6AU00-0PM0
General information
Product type designation IM 155-6 PN
HW functional status FS01
Firmware version V1.0
Vendor identification (VendorID) 02AH
Device identifier (DeviceID) 030FH
Product function
● I&M data
Yes; I&M0 to I&M3
Engineering with
● PCS 7 configurable/integrated as of version
V9.0
Configuration control
via dataset No
Supply voltage
Type of supply voltage DC
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Short-circuit protection Yes
Mains buffering
● Mains/voltage failure stored energy time
10 ms
Input current
Current consumption, max. 700 mA; +19.2 V to +28.8 V DC
Inrush current, max. 5 A
I²t 0.36 A²·s; Due to increased mains buffering of 10
ms
Power
Infeed power to the backplane bus 7.5 W; No doubling in redundant mode as the in‐
feed power is also designed as redundant.
Power loss
Power loss, typ. 2.4 W
Address area
Address space per module
● Address space per module, max.
256 byte
Address space per station
● Address space per station, max.
1 440 byte; 1 440 bytes R1 and S1 without CiR,
otherwise 1 000 bytes
Hardware configuration
Integrated power supply Yes; 24 V DC
Interface Module IM 155-6 PN HA (6DL1155-6AU00-0PM0)
Manual, 05/2017, A5E39262148-AA 25
To Next Page
Loading...
