Siemens ET 200SP HA - Product overview; 2.1 Properties

Product overview
2
2.1 Properties
View
① Module type and designation ⑧ MAC address (specific address for this exact module)
② LED for operating state ⑨ Function status and firmware version
③ LED for diagnostics ⑩ Article number
④ LED for maintenance ⑪ Connector for supply voltage
⑤ 2D matrix code ⑫ Slot for PROFINET BusAdapter
⑥ LED for master operation ⑬ PROFINET BusAdapter
⑦ LED for supply voltage ⑭ Terminal block for interface module (figure: for redundant
interface modules)
Figure 2-1 View of IM 155‑6 PN HA
Properties
The IM 155‑6 PN HA, together with the carrier and BusAdapter, forms the interface of the
ET 200SP HA.
The interface is used for communication between the CPU and the connected ET 200SP HA
I/O modules via PROFINET IO.
Interface Module IM 155-6 PN HA (6DL1155-6AU00-0PM0)
Manual, 05/2017, A5E39262148-AA 7