Siemens SIMATIC ET 200SP CM 1xDALI - Electric Control Gear (ECG) Type; Instance Type of Input Device; Description for EVENT_FILTER

Programming
5.9 Electric control gear (ECG) type
ET 200SP Communication module CM 1xDALI (6ES7137-6CA00-0BU0)
Manual, 06/2019, A5E46959434-AA
107
5.9
Electric control gear (ECG) type
The following table shows the detailed device types of the control gears:
Table 5- 9 Device type of the electric control gear
Type ID
Device type
16#00
Fluorescent
16#01 Emergency lamp
16#02
Discharge lamp
16#03 Halogen
16#04
Incandescent
16#05
Voltage converter
16#06
LED
16#07
Switch function
16#08
Color control
16#FF
General type
Others
Unknown type
5.10
Instance type of input device
The following table shows the detailed instance type of the input devices:
Table 5- 10 Instance type of input devices
Type ID
Device type
16#01
Push button
16#02
Absolute input device
16#03
Occupancy sensor
16#04
Light sensor
Others
Unknown type
5.11
Description for EVENT_FILTER
Push button (type 1)
Bit
Description
Value
0
Button released event enabled?
"1" = "Yes"
1
Button pressed event enabled?
"1" = "Yes"
2
Short press event enabled?
"1" = "Yes"
3
Double press event enabled?
"1" = "Yes"