Siemens SIMATIC ET 200SP IM 155-6 PN/2 HF - Technical specifications; General information; Product function; Engineering with

Interface module IM 155-6 PN/2 HF (6ES7155-6AU01-0CN0)
52 Manual, 10/2018, A5E03915895-AH
Technical specifications
7
Technical specifications of the IM 155-6 PN/2 HF
The following table shows the technical specifications as of 08/2018. You will find a data
sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/de/en/pv/6ES7155-6AU01-0CN0/td?dl=en).
Article number
6ES7155-6AU01-0CN0
General information
Product type designation
IM 155-6 PN/2 HF with server module
Firmware version
V4.2
• FW update possible
Yes
Number of MtM communication relation-
ships/connections, max.
16
Product function
• I&M data
Yes; I&M0 to I&M3
• Module swapping during operation (hot
swapping)
Yes; Multi-hot swapping
• Tool changer
Yes; Docking station and docking unit
• Local coupling, IO data
No
• Local coupling, data records
No
Engineering with
• STEP 7 TIA Portal configurable/integrated
as of version
STEP 7 V15.1 or higher
• STEP 7 configurable/integrated as of ver-
sion
Configurable via GSD file
• PROFINET as of GSD version/GSD revi-
sion
GSDML V2.3
Configuration control
via dataset Yes
Supply voltage
Rated value (DC)
24 V
permissible range, lower limit (DC)
19.2 V
permissible range, upper limit (DC)
28.8 V
Reverse polarity protection
Yes
Mains buffering
• Mains/voltage failure stored energy time
10 ms