Siemens SIMATIC ET 200SP IM 155-6 PN/2 HF - Status of the Supply Voltage L+ of the I;O Modules

Parameters/address space
4.4 Status of the supply voltage L+ of the I/O modules
Interface module IM 155-6 PN/2 HF (6ES7155-6AU01-0CN0)
34 Manual, 10/2018, A5E03915895-AH
The "current-free/voltage-free" behavior becomes effective in the following cases:
● Firmware update
● Reset to factory settings
● Configuration control: The IM has not received a valid control data record 196 yet
● Incorrectly configured module
● Module with incorrect parameter assignment
Substitute value behavior for module-internal Shared Output (MSO) and module-internal Shared Input
(MSI)
Substitute value behavior for module-internal Shared Output (MSO) and module-internal
Shared Input (MSI) corresponds to the behavior described above.
4.4
Status of the supply voltage L+ of the I/O modules
The status of the supply voltage L+ of the ET 200SP I/O modules can be mapped to the
server module with the interface module IM 155-6 PN/2 HF.
You can find information on the status of the supply voltage L+ of the I/O modules in the
Server module (http://support.automation.siemens.com/WW/view/en/63257531) manual.