Siemens fdsb291

Maintenance / Repair
29
Building Technologies 007025_i_en_--
Fire Safety & Security Products 07.05.2010
8 Maintenance / Repair
8.1 Status retrieval
The FDSB291 sounder base has a proximity interface (MC link).
Using this interface, it is possible to read out data from the device in a proximity
method over short distances with the detector exchanger and tester FDUD292 or
the intelligent detector tester FDUD293.
For details, see Documents 007227 and 009718.
The following actions can be performed from the control panel:
 Configure sounds
 Commissioning
 Activate / deactivate sound
 Read error list / status register
8.2 Function check
The devices are automatically subjected to a performance check during the self-
test. Nevertheless, it is necessary to check the devices on site at regular intervals.
Recommendation:
 Check the devices every year.
 Replace heavily soiled or damaged devices.
No other special maintenance work is necessary.
More information can be found in the control panel documentation.