EasyManuals Logo

Siemens Flender KMP Series User Manual

Siemens Flender KMP Series
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
26 / 84
BA 9142 en 02/2015
NOTICE
Property damage
Corrosion is possible when the gear unit is opened for too long.
Close the gear unit airtight again, at the latest one hour after opening.
Table 4 shows the maximum durability period for the preservation renewal with
"Castrol Corrosion Inhibitor N 213" depending on the packaging and setup or storage site. The definition
of climatic zones can be found in item 4.4.2.1.
Note
If the gear unit is transported after the preservation was renewed, the durability period according to
Table 2 in item 4.4.2.1 has to be observed.
Table 4: Maximum durability period of the preservation renewal with
"Castrol Corrosion Inhibitor N 213"
Setup in climatic zone A and at
least 50 km distance from larger
bodies of salt water
Setup in climatic zone B and/or
less than 50 km distance from
larger bodies of salt water
Packaging for
storage
Storage place of
packaged unit
Maximum durability period of the preservation renewal with
"Castrol Corrosion Inhibitor N 213" (in months)
No
packaging
exposed outdoors 5 3
covered with loose
tarpaulin
8 5
under roof
1)
20 14
in closed,
dry room
covered at least
with
loose tarpaulin
exposed outdoors 8 5
under roof
1)
24 17
in closed,
dry room
seaworthy
packaging
2)
exposed outdoors
20 20
covered with loose
tarpaulin
under roof
1)
24 24
in closed,
dry room
1) under roof:
no direct exposure to sunlight and no direct contact with water
(rain or draining water)
2) Seaworthy packaging:
use of wooden box lined with bitumen paper. The content is sealed in foil and protected against moisture
by addition of drying agents for the prescribed storage period.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens Flender KMP Series and is the answer not in the manual?

Siemens Flender KMP Series Specifications

General IconGeneral
BrandSiemens
ModelFlender KMP Series
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals