109
Configuring Advanced Settings
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / configure_router.fm / 02.07.2008
Schablone 2005_07_27
ì Go to the Advanced Settings menu and select: USB
ì Select the On option for USB.
ì Click OK to activate the USB port.
If a USB device is connected, its Status is displayed. If a USB mass storage device is con-
nected, the partitions are displayed.
ì Click Refresh to display the current status.
Notes:
u If you connect a USB hub to the USB port of the Giga762SX WLAN dsl, you can con-
nect and use a USB memory and a USB printer at the same time.
u If connecting a device without its own power supply directly to the USB port,
please note that the power consumption must not exceed 500 mA.
u The Giga762SX WLAN dsl supports USB V 2.0. Devices that support USB V 1.1 may
also be connected.
u The following file system formats are supported: FAT, FAT32, VFAT
NTFS is not supported.
u There should be not more than 1000 files stored in any directory of the USB mass
storage device.
To Next Page
Loading...
