148
Using the USB port
Giga762SX WLAN dsl / eng / A31008-M705-W171-1x-5819 / printer.fm / 02.07.2008
Schablone 2005_07_27
ì Enter the following data in the relevant fields:
– Printer name or IP address: Enter the IP address of the print server.
– Protocol Choose the option LPR.
– Queue name: lp0 (lower case: lima, papa, number 0)
– LPR Byte Counting Enabled should not be selected.
ì Click OK
ì Click Next.
The window for finishing the wizard is opened and shows you all the settings you
have made.
To Next Page
Loading...
