Siemens Gigaset C1 - Date and Time; Setting the Date and the Time; Changing the Time Mode; Making Calls

10
Date and Time
Gigaset C1 / englisch / A31008-C001-B001-1-6Z19 / start_guide_time.fm / 21.03.2003
Date and Time
Setting the date and the time
Correct date and time settings are essential if you want to know exactly when calls were
received.
Changing the time mode
You can choose between the 12 or 24 hour display (the factory setting is 24 hour).
MENU;
s Calender/Clock OK; s Time Mode OK; s (select display) OK (‰ = On);
a long press (back to idle status).
Making calls
Making external calls and ending a call
External calls are calls into the public telephone network.
~ (enter the number), press c (top half of the key).
To end the call: press a ('end call' key).
Inserting a dialling pause
You can insert a dialling pause between the prefix and the actual telephone number. To
do this, press
S for around 2 seconds. Now enter the telephone number.
[_______________]
MENU
Open the menu.
[__________] [_____________________________________________________________]
Calender/Clock
[_____ ____]OK
Select the menu item and confirm.
[_____________________________________________________________] [__________]
Date/Time OK
Confirm.
[_____ ___]
OK
Enter the date and confirm. Example: For 1.5.2003,
enter Q1Q5QI.
[_____ ___]
OK
Enter the time and confirm.
Example: For 9.35, enter
QOI5.
[_________] [_________ ]
OK
With the 12-hour display, select a.m. or p.m. and
confirm.
Long press (back to idle status).
i
◆ You can also press the top half of the c key first (you hear a ringback
tone) and then enter the number.
◆ You can use the end call key a to cancel the dialling operation.