Siemens Gigaset C1 - Directory and Speed Dial List; Storing a Telephone Number in the Directory; Storing a Telephone Number in the Speed Dial List

12
Directory and speed dial list
Gigaset C1 / englisch / A31008-C001-B001-1-6Z19 / start_guide_time.fm / 21.03.2003
Directory and speed dial list
You can store up to 50 numbers in the directory and the speed dial list.
The directory makes dialling easier for you. To open the directory, press the bottom half
of the
h key.
The speed dial list is a special directory in which you can store particularly important
numbers such as private telephone numbers and prefixes of network providers (so-
called 'call-by-call numbers'). You open the speed dial list with the C key.
The speed dial list is operated in just the same way as the directory, except for the
way in which entries are stored.
◆ Please refer to the Character Set Chart (page 18) to see how to enter text correctly.
◆ You can enter up to 32 digits for a number and up to 16 letters for a name.
◆ Turn to page 10 for instructions on how to insert a dialling pause.
Storing a telephone number in the directory
h (open directory); MENU; New Entry OK.
Storing a telephone number in the speed dial list
You can assign a digit (0, 2–9) to up to nine entries on your speed dial list. When you
press and hold one of these digits, e.g. '3', and press the top half of the c key you are
immediately connected to the telephone number that is assigned '3'.
C (open speed dial list); MENU; New Entry OK.
Speed dial digits cannot be assigned more than once at a time.
[_____ ___]
OK
Enter the number and confirm.
[_____ ______ _____ _]
MENU
Enter the name and press the display key.
[_____________________________________________________________] [__________]
Save Entry OK
Confirm. The entry is stored.
Long press (back to idle status).
[_____ __]
OK
Enter the number and confirm.
[_____ ______ _____ _]
MENU
Enter the name and press the display key.
[_____________________________________________________________] [__________]
Save Entry OK
Confirm. The entry is stored.
[______________]MENU
Press the display key to open the menu.
[__________] [_____________________________________________________________]
Shortcut
[_____ ____]
OK
Select the menu item and confirm.
[__________] [_____________________________________________________________]Shortcut: 2
[_____ ____]
OK
Select the digit and confirm.
Long press (back to idle status).