107
Using the connection assistant Making VoIP settings
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / settings_bs_hs_pabx.fm / 16.8.07
Version 2.1, 08.01.2007
Using the connection assistant
The connection assistant starts automatically when you set the handset and base station
up for the first time, or when you try to connect to the Internet before making the neces-
sary settings.
You can also start the connection assistant via the menu:
v
¢ Ð Settings ¢ Telephony
Connection Assist.
Select and press
§OK§.
~ Enter the system PIN and press §OK§.
For how to enter VoIP settings using the connection assistant, see page 16.
Changing settings without the connection assistant
You can change your provider's VoIP settings and the VoIP user data via the menu without
starting the connection assistant.
Downloading your VoIP provider's settings
The general settings for various VoIP providers are available for download on the Internet.
The relevant Web page is preconfigured in your phone.
Precondition: Your phone is connected to the Internet.
v
¢ Ð Settings ¢ Telephony ¢ VoIP
~ Enter the system PIN and press §OK§.
Select Provider
Select and press
§OK§.
The phone establishes a connection to the Internet.
q Select country and press
§OK§.
q Select your VoIP provider and press
§OK§.
Your VoIP provider data is downloaded and saved in your phone.
Please note:
– If an error occurs during the download, an error message will be displayed. You can find possible
messages and measures in the table on page 146.
– You can make and adapt the general settings for your VoIP provider manually via your phone's
Web configurator, see page 121.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
To Next Page
Loading...
