Siemens Gigaset C475 IP - Call Forwarding to Activate; Voip Connections; Setting DTMF Signalling for Voip

132
Web configurator Call Forwarding to activate VoIP connections
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 16.8.07
Version 2.1, 08.01.2007
Call Forwarding to activate VoIP connections
You can also forward calls for your VoIP numbers to another external number (VoIP, fixed
line network or mobile phone). The forwarding is done via a VoIP connection.
For each of your VoIP numbers (VoIP accounts) you can define if and when calls to this VoIP
number should be forwarded to a different phone number.
You can also use the handset to set the forwarding and activate/deactivate it, see page 41.
¤ Open the following Web page: Settings ¢ Telephony ¢ Call Forwarding.
The display shows a list of all the VoIP connections you have configured.
Connections
Name you have assigned to the VoIP number.
When
Select when a call to this VoIP number should be forwarded: When busy / No reply / Always.
Select Off to deactivate call forwarding.
Call number
Enter the phone number to which the calls should be forwarded. Please note that you
may have to enter the area code when forwarding to a fixed line network number in the
same area (depending on your VoIP provider and the setting for the automatic area
code, see page 134).
The settings only affect the selected VoIP phone number.
Setting DTMF signalling for VoIP
DTMF signalling is required, for example, for querying and controlling certain network
mailboxes via digit codes or for remote operation of the integrated answer machine
(Gigaset C475 IP).
To send DTMF signals via VoIP you must first define how key codes should be converted
into and sent as DTMF signals: as audible information via the speech channel or as "SIP Info"
message.
Ask your VoIP provider which type of DTMF transmission it supports.
¤ Open the following Web page: Settings ¢ Telephony ¢ Advanced Settings.
In the DTMF over VoIP connections area, make the required settings for sending DTMF signals.
¤ Activate Audio or RFC 2833, if DTMF signals are to be transmitted acoustically (in voice
packets).
¤ Activate SIP Info if DTMF signals are to be transmitted as code.
¤ Now click Set to save your settings.
Please note:
– You cannot forward your Gigaset.net number.
– How to forward your fixed line network number, see page 39.
Please note:
The settings for DTMF signalling apply to all VoIP connections (VoIP accounts).
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299