Siemens Gigaset C475 IP - Making VoIP settings; Using the connection assistant

120
Web configurator Configuring telephone connections
Gigaset C470-475 IP / EN for IM-Ost / A31008-xxxx-xxxx-x-xxxx / web_server.fm / 16.8.07
Version 2.1, 08.01.2007
Configuring telephone connections
You can configure up to eight numbers on your phone: your fixed line network number,
your Gigaset.net number and six VoIP numbers.
You need to set up a VoIP account with a VoIP provider for each VoIP phone number. You
must save the access data for each account and for the relevant VoIP provider in the phone.
You can assign a name to each connection (VoIP and fixed line network).
To configure the connections:
¤ Open the following Web page: Settings ¢ Telephony ¢ Connections.
A list (see Figure 3) will be shown with all possible connections that you can configure, or
have already configured, for your phone.
The list will show the following:
Name / Provider
Name of the connection. This will show the name that you have defined for the connec-
tion (page 122, page 126) or the default name (IP1 to IP6 for VoIP connections, Fixed Line
for the fixed line network connection and Gigaset.net).
VoIP connections also display the name of the VoIP provider with which you have
opened the account. If the name is unknown the display will show Other Provider.
Figure 3 List of possible connections
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299