Siemens Gigaset C475 IP - Web configurator - configuring the telephone via a PC

123
Operating the base station on the PABX
Switching temporarily to touch tone dialling (DTMF)
Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / settings_bs_hs_pabx.fm / 7.2.08
Version 2.1, 08.01.2007
Changing the pause after the recall key
You can change the length of the pause if your PABX requires this (refer to the user guide
for your PABX).
v55O
~ Enter a number for the length of the pause (1 = 1 sec.; 2 = 2 sec.; 3 = 3 sec.;
4 = 6 sec.) and press
§OK§.
Switching temporarily to touch tone dialling (DTMF)
If your PABX still operates with dial pulsing (DP), but you need touch tone dialling for a con-
nection (e.g. to listen to the network mailbox for your fixed line network) you must switch
to touch tone dialling for the call.
Precondition: You are currently conducting an external call via the fixed line network or
you have dialled an external fixed line network number or an external call is signalled.
§Options§ Open menu.
Tone Dialing Select and press §OK§.
Touch tone dialling is now activated for this call only.