Siemens Gigaset C475 IP - Ringback off

46
Network services
Further network services for fixed line networks
Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / netservices_SAG.fm / 7.2.08
Version 2.1, 08.01.2007
Functions during a call
Initiating ringback
You hear the busy tone.
§Options§ ¢ Ringback
a Press the end call key.
Consultation call
During a call:
§Ext.Call§ Press the display key.
~ Enter a number or copy it from the directory and press §OK§.
The number will be dialled via the fixed line connection.
You have the following options:
u Toggling:
¤ Use q to toggle between the participants.
– End call with active participant:
§Options§ End Active Call.
– End call with both participants: press the end call key a.
Accepting a waiting call
Precondition: Call waiting is activated (page 45).
§Accept§ Press the display key.
Or: if the caller's number is not transferred:
§Options§ ¢ Accept waiting call
You have the option of toggling or holding a conference call.
Functions after a call
Cancelling ringback
v ¢ ê Sel. Services ¢ Ringback Off
If you have cancelled the ringback, a code is sent.
¤ After confirmation from the telephone network, press the end call key a.
Please note:
After a few seconds, the number selected for a consultation call is saved in the last number redial list.
Please note:
– Without CLIP, a waiting call is only announced with a signal tone.
– If the first call was an internal call, the internal connection is ended.
– An internal call waiting is shown on the display. You can neither accept the internal call nor reject
it.