12
First steps
Setting up the handset for use
Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / starting.fm / 7.2.08
Version 2.1, 08.01.2007
¤ Insert the batteries the right way round (see figure).
The polarity is indicated in/on the battery compartment.
The handset switches on automatically. You will hear a confirmation tone.
Closing the battery cover
¤ First insert the battery cover at the top.
¤ Then press the cover until it clicks into place.
Opening the battery cover
¤ Place your fingertip in the cavity on the casing and pull the battery cover upwards.
Connecting the charging cradle
The charging cradle is designed to be operated in enclosed, dry areas at temperatures
ranging from +5 °C to +45 °C.
Instructions on how to connect the charging cradle and mount it on the wall (if required)
can be found on page 214.
¤ To charge the batteries, leave the handset in the charging cradle.
For questions and problems see page 163.
Please note:
– Only place the handset in the charging cradle that is intended for it.
– If the handset has turned itself off because the batteries are flat and is then placed in the charging
cradle, it will turn itself on automatically.
To Next Page
Loading...
