160
Web configurator – configuring the telephone via a PC
Starting a firmware update
Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / web_server.fm / 7.2.08
Version 2.1, 08.01.2007
Preconditions:
u No calls are being made via the fixed line network or VoIP.
u There is no connection between registered handsets.
u The base station menu is not open in any of the handsets.
¤ Open the following Web page: Settings ¢ Miscellaneous.
¤ Click Update Firmware.
The firmware is updated. This process can take up to 3 minutes.
Firmware update from local firmware file
It is possible under exceptional circumstances that you receive, for instance, a firmware file
from Service that you can upload from your PC to your telephone (e.g. because the
firmware update via the Internet did not work).
Precondition: A Web server is running on the local PC (e.g. Apache).
¤ First load the firmware file onto your PC.
¤ In the User defined firmware file field enter the IP address of the PC in your local network
and then complete path and name of the firmware file on the PC. Example:
192.168.2.105/C470IP/FW_file.bin.
¤ Click Set to save the changes.
¤ Click the Update Firmware button to start the update.
This setting is automatically used for this particular firmware update. The URL in the Data
server field is saved and used again for subsequent firmware updates. You will have to re-
enter IP address and file name if you need to carry out another firmware update on your
local PC.
Please note:
You can also start the firmware update on the handset (page 116).
Please note:
If an error arises during a firmware update from a local PC, the most recent version of the firmware
is automatically downloaded from the Internet.
To Next Page
Loading...
