Siemens Gigaset C590 - ECO DECT; Reduced Energy Consumption; Reducing Radiation; Activating;Deactivating Eco Mode; Eco Mode+

51
Using several handsets
Gigaset C590 / IM-NORD EN / A31008-M2101-R201-1-SM19 / registr_sett.fm / 29.06.2009
Version 4, 16.09.2005
Listening in to an external call
Precondition: The Listening In function
must be activated.
You are conducting an external call. An
internal participant can listen in on this
call and take part in the conversation. All
participants are made aware of the "listen-
ing in" by a signal tone.
Activating/deactivating
listening in
v ¢
Ï
¢ Telephony ¢ Listening In
Press §Change§ to activate/deactivate the
function (³ =on).
Internal listening in
The line is engaged with an external call.
Your screen will display information to
that effect. You want to listen in to the
external call.
c Press and hold the talk key.
You can listen in to the call. All participants
hear a signal tone. During this time, this
handset displays the Conference message
and it is not possible to dial another
number from this handset.
Ending listening in
a Press the end call key.
All participants hear a signal tone.
If the first internal participant presses the
end call key a, the handset that has
"listened in" remains connected to the
external participant.
Changing the name of a handset
The names "INT 1", "INT 2" etc. are
assigned automatically on registration.
You can change these names. The name
must be no more than 10 characters. The
changed name is displayed in every hand-
set list.
u Open the list of handsets. Your
own handset is indicated by
f
.
s Select handset.
§Options§ Open menu.
Rename
~ Enter name.
§Save§ Press the display key.
Changing a handset's internal
number
A handset is automatically assigned the
lowest free number when it is registered.
If all slots are occupied, number 6 is over-
written if this handset is in idle status. You
can change the internal number of all reg-
istered handsets (1–6).
u Open the list of handsets. Your
own handset is indicated by
f
.
§Options§ Open menu.
Assign Handset No.
Select and press
§OK§.
r Select number. Only numbers
that have not been assigned
are displayed.
§Save§ Press the display key to save
the input.
•