Siemens Gigaset C590 - Using Several Handsets; Registering Handsets

53
Handset settings
Gigaset C590 / IM-NORD EN / A31008-M2101-R201-1-SM19 / registr_sett.fm / 29.06.2009
Version 4, 16.09.2005
When the room monitor function is acti-
vated, the idle display looks as shown
below:
Changing the set destination number
v ¢ É ¢ Room Monitor
¤ Enter and save number as described in
"Activating the room monitor and
entering the destination number"
(
¢ page 52).
Cancel/deactivate room monitor
Press the end call key a to cancel the
call when the room monitor is activated.
In the idle status press the display key
§OFF§ to deactivate the room monitor
mode.
Deactivating the room monitor
remotely
Preconditions: The phone must support
tone dialling and the room monitor should
be set for an external destination number.
¤ Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings (e.g. no ringtone) on the
handset will remain activated until you
press the display key
§OFF§ on the handset.
To reactivate the room function with the
same phone number:
¤ Turn on the activation again and save
with
§Save§ (¢ page 52).
Handset settings
Your handset is preconfigured, but you
can change the settings to suit your indi-
vidual requirements.
Quick access to numbers and
functions
You can assign a number from the direc-
tory to each of the digit keys Q and
2to O.
The left and right display keys have a
function pre-selected by default. You can
change the assignment (
¢ page 54).
The number is then dialled or the function
started by simply pressing a key.
Assigning digit keys
Precondition: You have not yet assigned a
number to the digit key.
¤ Press and hold the digit key.
or
Press the digit key briefly and press the
§QuickDial§ display key.
The directory is opened.
¤ Select an entry and press §OK§.
The entry is saved on the appropriate digit
key.
i V
07:15
INT 1 22 Oct
Á
Room Monitor
0891234567
OFF Options
Please note
If you delete or edit the entry in the
directory at a later date, this will not
affect the assignment to the number
key.