55
Handset settings
Gigaset C590 / IM-NORD EN / A31008-M2101-R201-1-SM19 / registr_sett.fm / 29.06.2009
Version 4, 16.09.2005
§Save§ Press the display key.
When the screensaver conceals the dis-
play, briefly press a to show the idle
display.
Setting large font
You can increase the font size of print and
symbols in call lists and in the directory to
improve readability. After doing this, only
one entry instead of multiple entries can
be shown at the same time on each dis-
play and names are shortened where nec-
essary.
v
¢
Ï
¢ Display ¢ Large Font
§Change§ Press display key (³=on).
Setting the colour scheme
You can set the display to have a dark or
light background.
v
¢
Ï
¢ Display ¢ Colour Schemes
Select Colour Scheme 1 or Colour Scheme 2
and press
§OK§.
Setting the display backlight
Depending on whether or not the handset
is in the base/charging cradle, you can
activate or deactivate the lighting. If it is
activated, the display is permanently
dimmed.
v
¢
Ï
¢ Display ¢ Backlight
The current setting is displayed.
¤ Change multiple line input:
In Charger
Select On or Off.
Out of Charger
Select On or Off.
§Save§ Press the display key.
Activating/deactivating
auto answer
If you activate this function, when you
receive a call you can simply lift the hand-
set out of the base/charging cradle with-
out having to press the talk key c.
v
¢
Ï
¢ Telephony ¢ Auto Answer
§Change§ Press display key (³=on).
Changing the speaker/earpiece
volume
You can set the loudspeaker volume for
handsfree talking and the earpiece vol-
ume to five different levels.
In idle status:
t Call up the Handset Volume
menu.
r Set the earpiece volume.
s Scroll to the Speaker: line.
r Set the speaker volume.
§Save§ Press the display key if neces-
sary to save the setting perma-
nently.
Setting the volume during a call:
t Press the control key.
r Select volume.
The setting will automatically be saved
after approximately 3 seconds, if not then
press the display key
§Save§.
If t is assigned to another function,
e.g. call swap (
¢ page 30):
§Options§ Open menu.
Volume Select and press §OK§.
Configure setting (see above).
Please note
With the On setting, the standby
time of the handset can be signifi-
cantly reduced.
Please note
You can also set the call volume using
the menu (
¢ page 26).
To Next Page
Loading...
