Siemens Gigaset C590 - Setting the Date and Time

14
First steps
Gigaset C590 / IM-NORD EN / A31008-M2101-R201-1-SM19 / starting.fm / 29.06.2009
Version 4, 16.09.2005
Setting the date and time
Set the date and time so that the correct date and time can be assigned to
incoming calls, and so that the alarm can be used.
Date/Time
Date:
14.10.2009
Time:
00:00
Back Save
¤ Press the key below §Time§ on the
screen display to open the input
field.
(If you have already set the time and
date, open the input field via the
menu
¢ page 26.)
The Date/Time submenu is shown on
the display.
¤ The active input position flashes.
Enter day, month and year as an
8-digit number via the keypad,
e.g. 4Q
2QQO for 14/10/2009.
Date/Time
Date:
31.01.2009
Time:
00:00
Back Save
Calls Time
Press the right or left control
key to change the input posi-
tion and correct an entry.
¤ Enter the hours and minutes as
four digit numbers via the keypad,
e.g. QM5 for
07:15 am.
Change the input position with
the control key if necessary.
¤ Press down on the control key to switch
to the time input field.