Siemens Gigaset SL100 - Date and Time; Setting the Date and Time; Setting the Alarm Clock

14
Date and Time
Gigaset SL 100 / AUS/NZL / A31008-L100-L102-1-7619 / TimeCalendar.fm / 08.03.2004
Date and Time
Setting the date and time
Correct date and time settings are essential if you want to know exactly when callswere
received. You can choose between 12-hour and 24-hour display (factory setting) for the
time (a.m. = 1st half of the day; p.m. = 2nd half of the day).
v ¢ Calendar/Clock ¢ Date/Time
If you have selected the 12-hour display, on the Time: line you can use the display key
am/pm to toggle between am and pm.
Setting the alarm clock
Precondition: You have set the date and time.
Activating and setting the alarm clock
v ¢ Calendar/Clock ¢ Alarm Clock
~
Entering the date: Enter the day/month/year in the
Date: line.
s~
Entering the time: Scroll to the Time: line and enter
the hours/minutes (4-digit)
.
sr
Selecting display mode: Scroll to the Time Mode:
line and choose between 12-hour and 24-hour
mode.
[RRRRRRRRRRRRRRRRRRRRR]
Save
Now press the display key to confirm the entry.
r
Activating the alarm clock: In the line Room M.:
select On.
s~
Entering the alarm call: Scroll to the Time: line and
enter the hours/minutes (4-digit), e.g.
QM15 for "7:15 a.m.".
[RRRRRRRRRRRRRRRRRRRRR]
am/pm
If 12-hour mode is set:
Now press the display key to switch between am and
pm.
[RRRRRRRRRRRRRRRRRRRRR]
Save
Now press the display key to confirm the entry.
a
Long press (back to idle status). You will see the
¼ icon.
i
◆ The alarm will only ring if handset is in the idle status. There will be
no alarm ring with room monitor activated, during a call or automatic
last number redial.
◆ To find out how to set the wake-up volume and melody, turn to
page 66.