Siemens Gigaset SL100 - Connecting the base station

7
Preparing to use your phone
Gigaset SL 100 / AUS/NZL / A31008-L100-L102-1-7619 / starting.fm / 08.03.2004
Connecting the base station
i
For use in New Zealand please change the flash time from 100 ms
(Australia) to 600 ms (New Zealand) as per enclosed instruction.
i
◆ Keep the power supply unit plugged in at all times to ensure your
phone is ready for use whenever you need it.
◆ If you ever purchase a phone cord from a store, ensure that the phone
conductors are correctly connected (3-4 connection).
2.
Power sup-
ply unit
230V with
power cord
1.
Phone jack with
phone cord
SL 100
Back of the base station
Outlet
Phone outlet
◆ Fit the small jack on the phone cord into the socket in the base station (it clips into
place),
◆ Place cord in cable recess,
◆ Fit phone jack into phone outlet.
◆ Insert the small jack on the power cord into the socket on the underside of the
base station,
◆ Place cord in cable recess,
◆ Plug the power supply unit into your power outlet.
2.
3
2
1
4
5
6
1
2
3
4
5
6
unassigned
unassigned
a
b
unassigned
unassigned
Internal phone jack connections:
1.