62
Using several handsets
Gigaset SL 100 / AUS/NZL / A31008-L100-L102-1-7619 / registration.fm / 08.03.2004
Once the room monitor is activated, switch directly to the room monitor setting with v
(open menu).
Changing an external "call to" number
Precondition: You are in the entry field for the room monitor (Step 1, page 61).
Continue from Step 4 as described on page 62.
Changing an internal "call to" number
Precondition: You are in the entry field for the room monitor (Step 1, page 61).
Step 4: Set the sensitivity:
sr
You can scroll to the Level: line if you want to set the
sensitivity for the noise level (Low or High).
[RRRRRRRRRRRRRRRRRRRRR]
Save
Press the display key. The room monitor function is
now activated.
i
◆ If you want to copy the external telephone number from the directory,
while in the entry field for the telephone number press the bottom of
the control key s (open directory).
Now select an entry with
s
and confirm with .
◆ If you enter an external number as the "call to" number, only the last
4 digits will appear in the input panel.
OK
R[RRRRRRRRRRRRRRRRRRRR]
s Edit
Scroll to the Call to: line and press the display key.
Delete the number.
either ...
Enter the external telephone number:
~ Enter the new telephone number.
Press the display key to open the menu.
Save Entry
Confirm. The entry is stored.
or ...
Enter the internal telephone number:
[RRRRRRRRRRRRRRRRRRRRR]
INT
Press the display key.
s
Select the handset and confirm.
Û
à
OK
OK
R[RRRRRRRRRRRRRRRRRRRR]
s Edit
Scroll to the Call to: line and press the display key.
[RRRRR]
Yes
Press the display key to confirm the prompt.
[RRRRRRRRRRRRRRRRRRRRR]
Edit
Press the display key. The input field for the tele-
phone number is opened.
either ...
Enter an internal number as the "call to" number:
[RRRRRRR ]
INT
Press the display key.
Select the handset and confirm.
OK
To Next Page
Loading...
