Siemens Gigaset SL785 - Installing the base and charging cradle

11
First steps
Gigaset SL785 / GBR / A31008-M2009-L101-2-7619 / starting.fm / 25.03.2009
Version 4, 16.09.2005
Connecting the base
Please note:
u The mains adapter must always be connected, as the phone will not oper-
ate without mains connection.
u Only use the mains adapter and phone cord supplied. Pin connections on
telephone cables can vary (pin connections
¢ page 79).
1
3
2
1
1
4
¤ Connect the mains adapter 1
and phone jack 2 to the base
and place the cables in the
cable recesses.
¤ Place the cover in the notches on the
back of the base and click into place
(not if mounting on the wall).
¤ First connect the mains
adapter 3.
¤ Then connect the phone
jack 4.