Siemens Gigaset SL785 - Activating;Deactivating Auto Answer; Changing the Speaker;Earpiece Volume; Changing Ring Tones

67
Handset settings
Gigaset SL785 / GBR / A31008-M2009-L101-2-7619 / registr_sett.fm / 25.03.2009
Version 4, 16.09.2005
Setting the display backlight
Depending on whether or not the handset
is in the charging cradle, you can activate
or deactivate the backlight. If it is acti-
vated, the display is permanently
dimmed.
v
¢
Ï
¢ Display ¢ Backlight
The current setting is displayed.
¤ Change multiple line input:
In Charger
Select On or Off.
Out of Charger
Select On or Off.
§Save§ Press the display key.
Activating/deactivating auto
answer
If you activate this function, when you
receive a call you can simply lift the hand-
set out of the charging cradle without hav-
ing to press the talk key c.
v
¢
Ï
¢ Telephony ¢ Auto Answer
§Change§ Press display key (³=on).
Changing the speaker/earpiece
volume
You can set the loudspeaker volume for
speaker talking and the earpiece volume
to five different levels.
In idle status:
t Open the menu for setting the
Call Volume.
r Set the earpiece volume.
s Scroll to the Speaker line.
r Set the speaker volume.
§Save§ Press display key if necessary
to save the setting perma-
nently.
Setting the volume during a call:
t Press the control key.
r Select volume.
The setting will automatically be saved
after approx. 3 seconds, if not then press
the display key
§Save§.
If t is assigned with another function,
e.g. toggling (
¢ page 32):
§Options§ Open menu.
Volume Select and press §OK§.
Configure setting (see above).
Changing ring tones
u Volume:
You can choose between five volumes
(1–5; e.g. volume 3 = Š) and the
"crescendo" ring tone (6; volume
increases with each ring = ‡).
u Ring tones:
You can select various ring tones,
melodies or any sound from the
resource directory (
¢ page 68).
You can set different ring tones for the
following functions:
u Extern. Calls: for external calls
u Intern. Calls: for internal calls
u Appts: for set appointments
(
¢ page 56)
Set the volume and melody depending on
the type of signalling required.
In idle status:
v
¢
Ï
¢ Audio Settings ¢
Ringer Settings
q Select setting, e.g. Extern. Calls
and press
§OK§.
r Set volume (1–6).
Please note
With the On setting, the standby time
of the handset can be significantly
reduced.
Please note
You can also set the call volume using
the menu (
¢ page 28).