Siemens Gigaset SL785 - Switching Temporarily to Touch Tone Dialling (DTMF)

73
Connecting the base to the PABX
Gigaset SL785 / GBR / A31008-M2009-L101-2-7619 / pabx.fm / 25.03.2009
Version 4, 16.09.2005
Changing the pause after the recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v Open the main menu.
*#Q5#2
Press keys.
~ Enter a digit for the length of
the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press
§OK§.
Changing a dialling pause (pause after
access code)
Precondition: You have saved an access
code (
¢ page 72).
v Open the main menu.
*#Q5#
Press keys.
~ Enter number for the length of
the pause
(1 = 1 sec.; 2 = 2 sec.;
3 =3sec.; 4 = 6 sec.)
and press
§OK§.
To insert a dialling pause: press and hold
S for 2 seconds. A P appears in the dis-
play.
Switching temporarily to touch
tone dialling (DTMF)
If your PABX still operates with dial pulsing
(DP), but you need touch tone dialling
(DTMF) for a connection (e.g. to listen to
the network mailbox) you must switch to
touch tone dialling for the call.
Precondition: You are conducting a call or
have already dialled an external number.
* Press the star key.
After the call is ended, dial pulsing is auto-
matically activated again.