Siemens Gigaset SL785 - Battery Charge Status; Connecting the USB Data Cable

18
First steps
Gigaset SL785 / GBR / A31008-M2009-L101-2-7619 / starting.fm / 25.03.2009
Version 4, 16.09.2005
Display in idle status
Once the phone is registered and the time
set, the idle display is shown as in this exam-
ple. If the answering machine is activated,
the answering machine icon
Ã
will be dis-
played in the header.
The following is displayed after successful
registration:
u the strength of the reception signal
between base and handset:
– good to poor: ÐiÑÒ
–no reception: | flashes
u battery charge status:
– yy{{ (flat to full)
– y flashes red: battery almost empty
– xyx{x{(charging)
Your answering machine is set with a pre-recorded announcement.
Your phone is now ready for use!
Connecting the USB data cable
To connect your telephone with a PC (¢ page 81) you can connect the sup-
plied USB data cable to the back panel of your phone.
¤ Remove the belt clip (if attached)
(
¢ page 14).
¤ Remove the battery cover
(
¢ page 14).
¤ Connect the USB data cable to
USB socket
1.
Please note
u The range icon is only displayed in idle status if Eco Mode+ (¢ page 55)
is deactivated.
u The display of the calendar in idle status can be activated or deactivated
(
¢ page 56).
i à V
INT 1
Oct 2008
07:15
Calls Calendar
Mo Tu We Th Fr Sa Su
01 02 03 04 05
06 07 08 09 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30 31
1