Functions used when making calls
41
Step by step
w
[ Wait for the call to be answered. Start conversation.
You can program the HiPath 1100 to send a warning
tone if no external line is available for LCR (see Program-
ming manual - Main Configurations - Warning Tone
when LCR is not available). This will alert the user to the
fact that the call is being completed by a standard carri-
er and that rates may be higher than usual.
To warn the user that a different carrier is completing
the call, the system telephone will display the new car-
rier or "EXPENSIVE CONNECTION" and a warning tone
will sound.
LCR Bypass
1
This makes it possible temporarily to deactivate the
rules of the LCR for an external call, using the carrier se-
lected by the user to make the connection.
Required: The LCR feature is available.
Select and confirm.
or
S Press the "LCR BYPASS" key.
or
*45 Enter the code for "LCR BYPASS".
j Enter the desired carrier code and number.
[ Start conversation.
End LCR Bypass
\ Replace the handset.
or
n Press this key. The LED goes off.
(warning)
[1] The rules of the LCR will only be ignored for the current call. If a
consultation or redialing is made, the rules of the LCR will be ana-
lyzed for this new call.
This feature may be activated by any extension.
LCR BYPASS?
To Next Page
Loading...
