Siemens HiPath 500 - Handset Appointment Reminder Function

Step-by-Step
Additional functions
78
Deactivating the alarm clock
An appointment reminder call is signalled in the same
way as an incoming call.
o Press any key during an alarm call.
Deactivating the alarm clock
The handset is in idle status.
© Open the menu.
D E [Select and confirm the menu item.
D E [Select and confirm the menu item.
F Off G Fix the setting.
Save setting.
a Press and hold the On-hook key to end the process.
Handset appointment reminder func-
tion
You can arrange for your handset to remind you of an ap-
pointment. Only one appointment can be set. The hand-
set must be in idle status at the time of the appoint-
ment reminder. The appointment reminder function is
deactivated during automatic number redial.
Calendar/Clock
Alarm Clock
Save
Note:
Please note the following:
• First set the date and time. This sets the in-
ternal clock of the handset.
• Do not switch off the handset after you have
made the settings, otherwise the date and
time will be reset. The appointment reminder
function would otherwise be based on an in-
correct time setting.
• Check the date and time and reset from time
to time where applicable.