EasyManuals Logo

Siemens Hipath 5000 Administration Manual

Siemens Hipath 5000
240 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
inbetriebnahme.fm
A31003-S2010-M100-18-76A9
OpenStage HFA Family, Administration Manual
2-27
Startup
Quick Start
2.3.6 HFA Gateway Settings
To connect the OpenStage phone to the HiPath Communication System, the IP address of the
gateway, a subscriber number and the corresponding password is needed. The subscriber
number can be 1 to 24 characters long, and is used as the internal telephone number.
2.3.7 Using the Web Interface (WBM)
1. Log in to the Administrator Pages of the WBM. For details about accessing the WBM, see
section 2.3.1, “Access the Web Interface (WBM)”.
2. In the menu at the lefthand side, go to System > Gateway.
3. Enter the IP address of the HiPath Communication System in the Gateway address field.
4. In the Subscriber number field, enter the internal extension number of the phone. It can
be 1 to 24 characters long.
5. Enter the subscriber password in the New subscriber password field.
2.3.8 Using the Local Menu
Take the following steps to configure the access to an HFA gateway (for further information see
section 3.1, “Access via Local Phone”):
1. Press the mode key v once or twice to activate the administration menu (the key toggles
between the user’s configuration menu and the administration menu).
2. When the Admin menu is active, you will be prompted to enter the administrator password.
The default admin password is "123456". It is recommended to change the password (see
Section 3.11, "Password”) after your first login.
3. In the administration menu, go to System > HFA Gateway. For further instructions on en-
tering data using the Local menu see section 3.1, “Navigate within the Administration
Menu”. The path is as follows:
4. Enter the IP address of the HFA gateway provided by your HiPath communication system.
5. Enter the phone’s subscriber number, which will also serve as internal phone number.
6. Enter the password associated with the subscriber number.
7. After the data has been entered, select Save & exit and press .
|
--- Administration
|
--- System
|
--- HFA Gateway
|--- IP address
|--- Subscriber Number
|
--- Password

Table of Contents

Other manuals for Siemens Hipath 5000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens Hipath 5000 and is the answer not in the manual?

Siemens Hipath 5000 Specifications

General IconGeneral
BrandSiemens
ModelHipath 5000
CategoryTelephone
LanguageEnglish

Related product manuals