Siemens iQ100 ET611FEB8M - Time Setting Options; Setting Cooking Times; Using the Kitchen Timer

en Time-setting options
10
8 Time-setting options
Your appliance has different time-setting options which
can be used to set a cooking time or a kitchen timer.
8.1 Cooking time
Enter a cooking time for the relevant hotplate. When
the cooking time has elapsed, the hotplate switches off
automatically.
You can set a cooking time of up to 99 minutes.
Setting the cooking time
Requirement:The hotplate is selected.
1.
Select the heat setting.
2.
Touch ⁠.
a The ⁠ display for the hotplate lights up. ⁠ ⁠ lights
up on the timer display.
3.
Touch the required presetting on the control panel.
The possible presetting from left to right is 1, 2, 3.....
to 9minutes.
4.
Within the next 10seconds slide your finger along
the control panel until the required cooking time is
reached.
a The cooking time counts down. If you have set a
cooking time for more than one hotplate, the cook-
ing time of the hotplate selected is displayed.
a When the cooking time has elapsed, the hotplate
switches off. A signal sounds and ⁠ ⁠ flashes on the
display for 10seconds. The ⁠ display lights up
brightly.
Automatically setting the cooking time
Requirement:The hotplate is selected and set. The
cooking time setting is activated. →Page10
1.
Touch the settings 1 to 5 on the control panel for
longer.
a The cooking time will automatically count down to
one minute.
2.
Touch the settings 6 to 9 on the control panel for
longer.
a The cooking time will automatically count up to 99
minutes.
Changing or cancelling the cooking time
1.
Select the hotplate.
2.
Touch ⁠.
a The ⁠ display lights up brightly.
3.
On the control panel change the cooking time or set
it to ⁠ ⁠.
Switching off the continuous signal
You can switch the signal off manually.
▶
Touch any symbol.
a The displays will go out and the audible signal will
stop.
Automatic timer
You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the preselected cooking time counts down. When the
cooking time has elapsed, the hotplate switches off
automatically.
Switch on the automatic timer in the basic settings.
→Page12
Tip:The automatic timer is valid for all hotplates. You
can reduce or delete the cooking time for individual
hotplates. →Page10
8.2 Kitchen timer
You can set a time of up to 99 minutes after which a
signal will then sound. The kitchen timer runs inde-
pendently of all other settings.
Setting the kitchen timer
1.
Switch on the kitchen timer.
There are 2 different ways of switching the kitchen
timer on.
If a hotplate has been
selected.
Touch ⁠ twice within
10seconds.
If a hotplate has not
been selected.
Touch ⁠.
a The ⁠indicator lights up.
2.
Within the next 10seconds set the required time on
the control panel.
a The time counts down.
a When the time has elapsed, a signal sounds. ⁠ ⁠
lights up on the timer display. The ⁠indicator for
the kitchen timer lights up brightly. It switches off
after 10seconds.
Displaying the time
▶
Select the kitchen timer with ⁠.
a The time is displayed for 10seconds.
Setting the correct time
1.
Select the kitchen timer with ⁠.
2.
Set the required time on the control panel.
Switching off the timer signal
You can switch the signal off manually.
▶
Touch any touch field.
a The display goes out and the audible signal ceases.
8.3 Setting the cooking time
Requirement:The hotplate is selected.
1.
Select the heat setting.