Siemens iQ100 EU61RAGA5B User Manual (English)

Questions and Answers:

J
John GarciaJul 29, 2025
What to do if no displays light up on my Siemens iQ100 EU61RAGA5B?
- J
  jason87Jul 30, 2025
  If no displays light up on your Siemens Hob, it could be due to a disconnected power supply. Check other electrical appliances to see if there's a power failure. Alternatively, the hob might not be connected correctly according to the circuit diagram; ensure it's properly connected. If these steps don't resolve the issue, it could be an electronics fault, and you should inform the technical after-sales service.
L
Leonard JarvisAug 4, 2025
Why are the displays flashing on my Siemens iQ100 EU61RAGA5B?
- H
  Helen CummingsAug 4, 2025
  Flashing displays on your Siemens Hob can occur if the control panel is wet or something is covering it; dry the panel or remove the object. It can also happen if the electronics have overheated, causing one or more cooking zones to switch off. If overheating is the cause, wait for the electronics to cool down, and then touch any button on the control panel.
C
crystalprattAug 11, 2025
What to do if the cooking zone on my Siemens iQ100 EU61RAGA5B Hob overheated?
- W
  Wendy VasquezAug 11, 2025
  If a cooking zone on your Siemens Hob has overheated and switched off to protect the work surface, wait until the electronics have cooled down sufficiently before switching the cooking zone back on.
W
williammathewsAug 17, 2025
What to do if there is hot cookware near the control panel of my Siemens iQ100 EU61RAGA5B?
- R
  robertsonanthonyAug 17, 2025
  If you have hot cookware near the control panel of your Siemens Hob, it may cause the electronics to overheat. Remove the cookware. The fault display should disappear shortly, allowing you to continue cooking. If a cooking zone has switched off to protect the electronics, remove the cookware, wait a few seconds, and touch any button. Once the fault display is gone, you can resume cooking.
C
charlesjonathanAug 22, 2025
What to do if the cooking zone on my Siemens iQ100 EU61RAGA5B Hob has been operating continuously?
- J
  Jennifer Johnson DDSAug 22, 2025
  If a cooking zone on your Siemens Hob has been operating continuously for an extended period, the individual safety switch-off may be activated. Touch any button to switch off the display, which will then allow you to set the cooking zone.

Siemens iQ100 EU61RAGA5B Specifications

General

Type	Induction Hob
Number of Burners/Zones	4
Control Type	Touch Control
Surface Material	Ceramic Glass
Color	Black
Power Levels	17
Boost Function	Yes
Timer	Yes
Child Safety Lock	Yes
Automatic Pan Recognition	Yes
Voltage	220-240 V
Frequency	50/60 Hz
Installation Type	Built-in
Dimensions (W x D x H)	592 x 522 x 51 mm
Weight	11 kg
Safety Features	Residual Heat Indicator