Appliance door en
27
21.4 Fitting the door panes
Note:
Ensure that the arrow is on the top left on the interme-
diate panes.
1.
Slide the first intermediate pane into the lowest re-
tainer and fit it at the top.
2.
Note:The intermediate pane is automatically posi-
tioned by the rotational movement of the spacer.
Slide the second intermediate pane into the central
retainer and fit it at the top.
3.
Close the metal strip on the left and right .
4.
Note:The lettering "Pyro" must be legible at the top,
as shown in the picture.
Slide the inner pane into the retainer at the bottom
and fit it at the top.
5.
Push the inner pane in at the top . Push the sliding
caps downwards in the direction of the arrow.
6.
Open the appliance door fully.
7.
Close the locking levers on the left- and right-hand
hinges
8.
Close the appliance door.
Note:Do not use the cooking compartment again until
the door panes have been correctly fitted.
To Next Page
Loading...