Siemens iQ700 HS758G3 1B Series - 16.2 Changing the basic settings; 17 Home Connect; 17.1 Setting up the Home Connect app

HomeConnect en
25
Appliance set-
tings
Selection
Pull-out system ¡ Retrofitted (if 2 or 3 sets of pull-
out rails are fitted)
¡ Not retrofitted (if shelf supports
and a single set of pull-out rails
are fitted)
1
Lighting ¡ On when cooking and when
opening the door
1
¡ Only when the door is opened
¡ Always off
Water hard-
ness
¡ 4 (very hard)
1
¡ 3 (hard)
¡ 2 (medium)
¡ 1 (soft)
¡ 0 (softened)
1
Factory setting (may vary according to model)
Personalisa-
tion
Selection
Brand logo ¡ Display
1
¡ Do not display
Operation after
switch-on
¡ Main menu
1
¡ Types of heating
¡ Steaming
¡ Dishes
¡ Favourites
Elapsed cook-
ing time
¡ Display
1
¡ Do not display
Dishes ¡ All
1
¡ No pork
¡ Kosher only
1
Factory setting (may vary according to model)
Personalisa-
tion
Selection
Regional
dishes
¡ All
1
¡ European dishes
¡ British dishes
Childproof
lock
¡ Keylock only
1
¡ Deactivated
Automatic
rapid heating
¡ On
1
¡ Off
1
Factory setting (may vary according to model)
Factory set-
tings
Selection
Factory set-
tings
¡ Restore
Appliance in-
formation
¡ Appliance information
16.2 Changing the basic settings
1.
Press in the status bar.
2.
Press the required basic settings area.
3.
Press the required basic setting.
4.
Press to select the required basic setting.
a The change is applied directly for most basic set-
tings.
5.
To change additional basic settings, use to go
back and select a different basic setting.
6.
To exit the basic settings, use to go back to the
main menu or switch off the appliance using ⁠.
a The changes are saved.
Note:Your changes to the basic settings will be re-
tained even after a power failure.
HomeConnect
17 HomeConnect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the HomeConnect app, adjust its basic settings
and monitor its operating status.
The HomeConnect services are not available in every
country. The availability of the HomeConnect function
depends on the availability of HomeConnect services
in your country. You can find information about this at:
www.home-connect.com.
The HomeConnect app guides you through the entire
login process. Follow the instructions in the HomeCon-
nect app to configure the settings.
Tip:Please also follow the instructions in the
HomeConnect app.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the HomeCon-
nect app.
→"Safety", Page2
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the HomeConnect
app.
¡ In networked standby mode, the appliance requires
a maximum of2W.
17.1 Setting up the HomeConnect app
1.
Install the HomeConnect app on your mobile
device.
2.
Start the HomeConnect app and set up access for
HomeConnect.
The HomeConnect app guides you through the en-
tire login process.