Siemens Iq700 KF96D Series - Reduced Water Output; Dripping Ice;Water Dispenser; Low Ice Cube Production

Troubleshooting en
37
Fault Cause and troubleshooting
Water output is re-
duced.
Low water pressure.
▶ Check the water pressure of the water supply sys-
tem or the external water filter system, e.g. reverse
osmosis system.
Connect the appliance only to a water connection
with sufficient water pressure. →Page9
The water filter is blocked.
▶
Change the water filter. →Page27
Water is dripping from
the ice and water dis-
penser.
Air is in the water system.
▶ Keep dispensing water until it contains no more air.
Ice residue is melting in the ice chute.
▶ Remove the ice residue from the ice chute, for ex-
ample using a wooden spoon.
Ice cube production is
low.
The appliance has only recently been connected.
▶ Wait approximately four hours until the first batch of
ice cubes is ready.
The freezer compartment has been opened frequently
or for an extended period of time.
▶ Check ice cube production after a few hours.
Low water pressure.
▶ Check the water pressure of the water supply sys-
tem or the external water filter system, e.g. reverse
osmosis system.
Connect the appliance only to a water connection
with sufficient water pressure. →Page9
The water filter is blocked.
▶
Change the water filter. →Page27