Preventing material damageNL
2 Preventing
material damage
3.2 Saving energy
If you follow these directions, your
device will use less power.
PAY ATTENTION!
Tilting the appliance wheels can
damage the floor when moving the
appliance.
▶ Transport the device with a hand
truck.
▶ When moving the device, use a
floor protector and do not move in
a zigzag.
Using the plinth, drawers or
appliance doors as a seat or step can
damage the appliance.
▶ Do not stand or lean on the plinth,
drawers or doors.
Contamination with oil or grease can
make plastic parts and door seals
porous.
▶ Keep plastic parts and door
seals free of oil and grease.
Parts of the device made of metal or
with a metallic appearance may
contain aluminum. Aluminum reacts
on contact with acidic foods.
▶ Do not store unpackaged food in
the appliance.
Choice of installation location
†Do not expose the device to di-
direct sunlight.
†Place the appliance as far as possible
body from radiators, stove and
other heat sources:
– Keep a distance of 30 mm
from electric or gas stoves.
– Keep a distance of 300 mm from
oil and coal stoves.
†Keep a small distance to the side
wall on.
†The external vents
never cover or block.
Save energy when using.
Remark:The arrangement of the
equipment parts has no influence on
the energy consumption of the
appliance.
†Open the device only briefly and
close it carefully.
†The inner vents
or never cover or block the
external ventilation openings.
†Transport refrigerated foodstuffs
parts in a cool bag and put them in the
appliance quickly.
†Warm food and drinks first
to cool, then place in the
appliance.
†To avoid the cold of the deep-
to use frozen products, put them in the
refrigerator compartment for thawing. †
Always leave some space between the legs
equipment and the back wall.
3 Environmental protection and
savings
3.1 Disposing of the
packaging
The packaging materials are
environmentally friendly and can be
reused.
▶ Dispose of the individual components
separately according to type.
91
To Next Page
Loading...
