Getting to know your deviceNL
4.4 Preparing the device for the
first use
5
Fruit and vegetable drawer
→
Page 94
Type plate →
Page 107
freezer drawer →
Page 101
Leveling foot
1.Remove the information material.
6
2.Remove the protective film and transport
safeguards, eg adhesive strips and
cardboard.
7
8
3.Cleaning the device for the first
time.
Page 100
9
Door rack for large bottles
→
Page 94
4.5 Connecting the appliance
electrically
Remark:Differences between your
device and the images may be based
on equipment and size.
1.Insert the mains plug of the mains
cable of the device into a socket
in the vicinity of the device.
5.2 Control panel
You can set all functions of your
device and obtain information about
the operating status via the control
panel.
→
fig.
The connection data of the device
can be found on the type plate.
→
fig.
†
1
6
2.Check the mains plug for tightness.
2
switches the
warning signal off.
aThe appliance is now ready for use
use.
1
2
switches Super-
freeze in or out.
5 Getting to know your appliance
nen
3
switches Supercow
len in or out.
4
Shows the set temperature of the
freezer compartment in °C.
5.1 Device
5
Shows the set temperature of the
refrigerator compartment in °C.
Here you will find an overview of the
components of your device.
→
fig.
6
switches the device on
1
in or out.
a
Cooling compartment →
Page 97
Freezer compartment →
Page 98
B
1
Control panel
→
Page 93
2
Relief
Bottle rack →
Page 94
Storage drawer →
Page 94
3
4
93
To Next Page
Loading...
