NLTroubleshooting
14 Troubleshooting
You can remedy minor faults on the device yourself. Before contacting customer
service, please refer to the troubleshooting information. This way you avoid
unnecessary costs.
WARNING
Risk of electric shock! Improper repairs
are dangerous.
▶ Only qualified personnel may carry out repairs on the device.
▶ Only original spare parts may be used for repair of the device.
▶ If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, its service agent or a similarly qualified person in order to avoid
a hazard.
Malfunction Cause and Troubleshooting
Device does not cool,
indicators and lighting
are on.
The presentation light is turned on.
1.Loves 9 to 11 seconds until a
sound signal is heard.
2.After a short time, check whether your appliance is cooling.
LED lighting does not
function.
Various causes are possible.
▶ Contact customer service.
The service number can be found in the enclosed
service overview.
Side panels of the
appliance are hot.
No malfunction. Pipes run in the side walls, which
become hot during the cooling process. Furniture
against the appliance will not be damaged by the heat.
No action required. No action required.
Temperature displays
and to burn.
A sensor is defective.
▶ Contact customer service.
The service number can be found in the enclosed
service overview.
A warning signal
sounds, the
set temperature
ture (refrigerated compartment) and
blink.
Refrigerator compartment door is open.
▶ Close the refrigerator compartment door.
102
To Next Page
Loading...
